 |  | 
1x1 Power Supply Mounting Bracket.
1x1 SFP Fiber Optic Module non-SMA 2km 3G HD-SDI Tx/Rx for VS-44FO & VS-88FO
1x1 SFP Fiber Optic Module non-SMA 40km 3G HD-SDI Tx/Rx for VS-44FO & VS-88FO
1x1 to 4x4 3G HD-SDI Matrix Switcher with a range up to 40KM. Requires 1-4 SFP I/O Modules
1x1 to 8x8 3G HD-SDI Matrix Switcher with a range up to 40KM. Requires 1-8 SFP I/O Modules
1x1 V-Mount Battery Adapter Plate including a 6 in (15 cm) D-Tap Power Cable allows the use of professional V-Mount batteries to power all 1x1 fixtures.
1x1/Ringlite Mini Power Supply. Does not include Power Cord.
1x120W @ 70V/100V And 2x60W @ 8? Controllable Power Amplifi
1x2 12G distribution amplifier
1x2 Displayport 1.2 splitters/distribution amplifiers • DisplayPort 1.2 (DP 1.2) compliant • Supports HBR2/HBR/RBR • Supports SST or MST • Supports 1, 2 or 4 lanes • HDCP compliant • *Supports In/out DP++ (DisplayPort ++ / Dual-mode DisplayPort) • Supports all 3D formats defined in HDMI 1.4 and Display Port 1.2a * Dual-mode DisplayPort (also known as DisplayPort++) can directly output single-link HDMI and DVI signals using a simple passive adapter that adjusts from the different connector and the lower voltages used by DisplayPort. When a dual-mode chipset detects that a DVI or HDMI passive adapter is attached, it switches to DVI/HDMI mode which uses the 4-lane main DisplayPort link and the AUX channel link to transmit three TMDS signals, a clock signal and Display Data Channel data/clock. Dual-mode ports are marked with the DP++ logo; most DisplayPort graphics cards, as well as all Thunderbolt ports with mDP connector, support this mode.
1x2 HDMI Distribution Amplifier (4Kx2K)
1x2 LED Mount for Absen Acclaim Series Built for the Absen Acclaim Series. Mounts 2 LED displays. Connects to sides, top and bottom of other TiLED Acclaim mounts to create endless video wall configurations. Off-the-shelf solution set means product is ready to ship – no custom lead time or project registration required. Key Features Modular design supports creative video wall design Integrated plumb adjustment helps compensate for imperfections in the wall Keyhole slots allow for fast and easy mount installation Offset mounting slots for easy installation and to protect LED sides from damaging friction Depth range with panel between 3.63-4.63” (92-118 mm) for low-profile result Standard, off-the-shelf solution set means product is stockable and ready to ship – no custom lead times
1x2 LED Mount for Samsung IFH Series Built for the Samsung IFH Series. Mounts two LED displays. Connects to sides, top and bottom of other TiLED Series mounts to create video wall configurations. Key Features Integrated plumb adjust of 1" (25 mm) compensates for imperfections in the wall Depth range including panel between 3.48-4.48" (88-114 mm) for low-profile result Keyhole slots allow for fast and easy mount installation Offset display mounting slots protect LED sides from damaging friction Modular system supports creative video wall design and simplifies specification Standard, off-the-shelf solution set means product is stockable and ready to ship – no custom lead times
1x2 LED Mount for Unilumin UpanelS Series Built for the Unilumin® UpanelS Series. Mounts 2 LED displays. Connects to sides, top and bottom of other TiLED UpanelS mounts to create endless video wall configurations. Off-the-shelf solution set means product is ready to ship – no custom lead time or project registration required. Key Features Modular design supports creative video wall design Integrated plumb adjustment helps compensate for imperfections in the wall Keyhole slots allow for fast and easy mount installation Offset mounting slots for easy installation and to protect LED sides from damaging friction Depth range with display between 3.85-4.85” (98-123 mm) for low-profile result Standard, off-the-shelf solution set means product is stockable and ready to ship – no custom lead times
1x2 VGA Distribution Amplifier w/Audio
1X200W constant voltage(70V/100V) power amplifier.
1x240W @ 70V/100V And 2x120W @ 8? Controllable Power Amplif
1X3 LED Mount for Absen Acclaim Series Built for the Absen Acclaim Series. Mounts 3 LED displays. Connects to sides, top and bottom of other TiLED Acclaim mounts to create endless video wall configurations. Off-the-shelf solution set means product is ready to ship – no custom lead time or project registration required. Key Features Modular design supports creative video wall design Integrated plumb adjustment helps compensate for imperfections in the wall Keyhole slots allow for fast and easy mount installation Offset mounting slots for easy installation and to protect LED sides from damaging friction Depth range with panel between 3.63-4.63” (92-118 mm) for low-profile result Standard, off-the-shelf solution set means product is stockable and ready to ship – no custom lead times
1x3 LED Mount for Samsung IFH Series Built for the Samsung IFH Series. Mounts three LED displays. Connects to sides, top and bottom of other TiLED Series mounts to create video wall configurations. Key Features Integrated plumb adjust of 1" (25 mm) compensates for imperfections in the wall Depth range including panel between 3.48-4.48" (88-114 mm) for low-profile result Keyhole slots allow for fast and easy mount installation Offset display mounting slots protect LED sides from damaging friction Modular system supports creative video wall design and simplifies specification Standard, off-the-shelf solution set means product is stockable and ready to ship – no custom lead times
1x4 12G distribution amplifier
1x4 3GSDI distribution amplifier
1x4 3GSDI distribution amplifier With the Marshall Electronics VDA-104-3GS 1x4 3G/HD/SD-SDI Reclocking Distribution Amplifier, you can take a single SDI signal and send it out to up to four devices simultaneously. SD, HD, and 3G-SDI standards are supported, and the input standard is automatically detected. Each SDI output is separately reclocked and buffered, ensuring signal fidelity over long cable runs. Easy-to-read LED status indicator lights denote the converter's current status. The integrated mounting brackets on both sides of the unit can be used for semi-permanent installation.
1X4 DA*SD/ASI NON-RCLK*1 SLOT Single 1x4 distribution amplifier, SD/ASI non-reclocking, 1 slot
1X4 DA, 3G/HD/SD/ASI NON-RCLK, 1 SLOT Single 1x4 distribution amplifier, 3G/HD/SD/ASI non-reclocking, 1 slot
1X4 DA, 3G/HD/SD/ASI W/ RCLK, 1 SLOT Single 1x4 distribution amplifier, 3G/HD/SD/ASI with reclocking, 1 slot
1X4 DA, SD/ASI W/ RCLK, 1 SLOT Single 1x4 distribution amplifier, SD/ASI with reclocking, 1 slot
1x4 DisplayPort 1.2 Distribution Amplifier/Splitter DP-1x4-II is a high-speed 4 port DisplayPort splitter/distribution amplifier targeted for audio/video de-multiplexing and in distribution for applications such as notebook computers, docking stations, video hub, 4K2K TV/displays, daisy chainable monitors, digital signages and more. It consists of one DisplayPort input and two dual mode output ports, that are configurable as either DisplayPort or HDMI.
1x4 HDMI Distribution Amplifier (4Kx2K)
1x4 HDMI Splitter, v1.3, Full Support 1080p HDTV, PNP, with Power Adapter, Fine Alloy Metal Case, Black Color
1X4 LED Mount for Absen Acclaim Series Built for the Absen Acclaim Series. Mounts 4 LED displays. Connects to sides, top and bottom of other TiLED Acclaim mounts to create endless video wall configurations. Off-the-shelf solution set means product is ready to ship – no custom lead time or project registration required. Key Features Modular design supports creative video wall design Integrated plumb adjustment helps compensate for imperfections in the wall Keyhole slots allow for fast and easy mount installation Offset mounting slots for easy installation and to protect LED sides from damaging friction Depth range with panel between 3.63-4.63” (92-118 mm) for low-profile result Standard, off-the-shelf solution set means product is stockable and ready to ship – no custom lead times
1X4 LED Mount for Unilumin UpanelS Series Built for the Unilumin® UpanelS™ Series. Mounts 4 LED displays. Connects to sides, top and bottom of other TiLED UpanelS mounts to create endless video wall configurations. Off-the-shelf solution set means product is ready to ship – no custom lead time or project registration required. Key Features Modular design supports creative video wall design Integrated plumb adjustment helps compensate for imperfections in the wall Keyhole slots allow for fast and easy mount installation Offset mounting slots for easy installation and to protect LED sides from damaging friction Depth range with display between 3.85-4.85” (98-123 mm) for low-profile result Standard, off-the-shelf solution set means product is stockable and ready to ship – no custom lead times
1x5.25 Audio SATA Mobile Rack
1x5.25 Audio SATA Mobile Rack
1x5.25 SATA Mobile Rack Blue
1x5.25 SATA Mobile Rack Red
1x5.25 SATA Mobile Rack Silver
1x5.25" Bay SAS/SATA 6.0 Gb/s
1x5.25" Bay SAS/SATA 6.0 Gb/s
1x5.25" Bay SAS/SATA 6.0 Gb/s
1x5.25" to 8 Slim SSD HS Cage
1X500 SHEET FEEDER KIT
1X500 SHEET PAPER FEEDER ASSEMBLY
1X500-SHEET FEEDER ASSEMBLY
1x550-sheet paper feeder cassette assemb
1x6 3GSDI distribution amplifier
1x6 3GSDI distribution amplifier With the Marshall Electronics VDA-106-3GS 1x6 3G/HD/SD-SDI Reclocking Distribution Amplifier, you can take a single SDI signal and send it out to up to six devices simultaneously. SD, HD, and 3G-SDI standards are supported, and the input standard is automatically detected. Each SDI output is separately reclocked and buffered, ensuring signal fidelity over long cable runs. Easy-to-read LED status indicator lights denote the converter's current status. The integrated mounting brackets on both sides of the unit can be used for semi-permanent installation.
1X8 DA W/ LOOPING IN, 3G/HD/SD/ASI W/ RCLK,2 SLOTS Single 1x8 distribution amplifier with looping inputs, 3G/HD/SD/ASI with reclocking, 2 slots
1X8 DA W/ LOOPING IN,3G/HD/SD/ASI NON-RCLK,2 SLOTS Single 1x8 distribution amplifier with looping inputs, 3G/HD/SD/ASI non-reclocking, 2 slots
1X8 DA W/ LOOPING INPUTS*SD/ASI NON-RCLK*2 SLOTS Single 1x8 distribution amplifier with looping inputs, SD/ASI non-reclocking, 2 slots
1X8 DA W/ LOOPING INPUTS, SD/ASI W/ RCLK, 2 SLOTS Single 1x8 distribution amplifier with looping inputs, SD/ASI with reclocking, 2 slots
|
|